Engine testing.

Anything technical in here

Re: Engine testing.

Postby pbove » Thu Nov 18, 2021 9:47 am

Check the head carefully with a straight edge.... and change the gasket. While you're at it, change the cam belt and cam belt tensioner. Mark the camshaft and the flywheel position before stripping and make sure that you get it all back in exactly the same position. Also, be careful as there are two different types of cam belt - so make sure you get the right one!
Posts: 2473
Joined: Wed Sep 26, 2007 6:41 pm
Location: Tewin Wood, Welwyn


Return to Technical

Who is online

Users browsing this forum: No registered users and 1 guest