EBC BRAKE PADS

If you know of someone who can supply parts for 750F cars, please post in here.

EBC BRAKE PADS

Postby Ian Allen » Thu Nov 22, 2007 5:42 pm

EBC Have said that they will still give the 50% discount for all 750 racers ( you just have to put the sticker on the car) assuming that the agreement to allow the ebc sticker is still ok for next year. Pads for my ADR Willwoods worked out to £12.50 for the front and £11.60 for the rear + vodka and tonic. This is EBC Direct not a distributor.

Call Bob on 01604 583344. he said he's looking forward to recieving your calls (he's a nice bloke)

Ian
User avatar
Ian Allen
 
Posts: 1033
Joined: Mon Oct 01, 2007 10:33 am
Location: Spalding Lincs.

Re: EBC BRAKE PADS

Postby RobSmith » Thu Nov 22, 2007 7:37 pm

He is indeed a good chap.
Rob
RobSmith
 
Posts: 140
Joined: Wed Sep 26, 2007 12:55 pm

Re: EBC BRAKE PADS

Postby will » Thu Nov 22, 2007 7:58 pm

I must have rung the wrong chappie - mine cost a whopping £30.
Silly Billy

Will
will
 
Posts: 532
Joined: Wed Sep 26, 2007 7:58 pm

Re: EBC BRAKE PADS

Postby RobSmith » Thu Nov 22, 2007 9:21 pm

I suppose it depends on what calipers you have.
Mine were not as cheap as Ians but less than yours.
Rob
RobSmith
 
Posts: 140
Joined: Wed Sep 26, 2007 12:55 pm

Re: EBC BRAKE PADS

Postby max » Tue Jan 31, 2012 11:36 am

Have just ordered some more pads from Bob and can confirm the offer is still open.
MS750/01
max
 
Posts: 604
Joined: Thu Sep 27, 2007 6:57 pm

Re: EBC BRAKE PADS

Postby Martin Kemp » Tue Jan 31, 2012 12:35 pm

And they now have pads for Wilwood Dynapro calipers as well,

Martin
Martin Kemp
 
Posts: 1258
Joined: Thu Sep 27, 2007 9:04 am

Re: EBC BRAKE PADS

Postby will » Tue Jan 31, 2012 7:26 pm

Ultimax are the best pads I have ever managed to get for my road cars...however the Greenstuff didn’t work on the racer, nor did the red....nor did the yellow. Haven’t tried the blue!
I tried three other compounds and eventually found one that worked extremely well and didn’t take two laps to bring up to temperature.
Will
will
 
Posts: 532
Joined: Wed Sep 26, 2007 7:58 pm


Return to Suppliers for 750F parts

Who is online

Users browsing this forum: No registered users and 1 guest

cron