ADR1000-T Build

Building your own 750? let us know about your progress. Also in this section: suppliers who can build you a custom 750 - have a chat and see what they can do for you!

Re: ADR1000-T Build

Postby Jimbob » Sat Jul 06, 2019 6:44 am

Thanks guys, ended up at 29.
The rolling road work went ok, spent a bit of time sorting the fuelling and it now runs and drives well.

It then went out into the yard for a couple of launches to test the driveline. The first went well, the car just picked up and went, but on the second launch I heard it skip a couple of teeth. On closer inspection it seems I have bent the bracket that supports the diff outputs. Impressive as this is 50 by 3mm box!
However I've a plan to get it sorted by bracing it backwards to the rear bearing blocks once I've had the bracket in the press to straighten it.
Other than that everything else went ok, the fluids all stayed in the right place and all the systems worked.
I've a fair bit to do before cadwell but I've got a couple of weekends so we'll see if I can make it!
IMG_20190705_124005-312x416.jpg
IMG_20190705_124005-312x416.jpg (62.88 KiB) Viewed 640 times
Jimbob
 
Posts: 53
Joined: Wed Aug 17, 2016 4:37 pm

Re: ADR1000-T Build

Postby pbove » Sat Jul 06, 2019 9:23 am

Sounds like a good step forward, I hope we see you at Cadwell!
pbove
 
Posts: 2203
Joined: Wed Sep 26, 2007 6:41 pm
Location: Tewin Wood, Welwyn

Previous

Return to Builder's Garage

Who is online

Users browsing this forum: Google [Bot] and 1 guest